In cazul in care acest articol nu se afla in stoc, va rugam luati in considerare urmatoarele: comenzile catre acest furnizor se fac la intervale regulate. Va rugam sa comandati acum acest articol pentru a-l putea include pentru dumneavoastra in urmatoarea noastra comanda si pentru a-l putea livra aproximativ la data afisata.
Din pacate, descrierea acestui produs nu a fost inca tradusa in limba romana, din acest motiv veti gasi in loc o descriere in limba engleza.
Off-Axis Guider - Tracking the stars the easy way
An off-axis guider provides an easy way of guiding the telescope for taking your astronomy photos. You do not need to mount a large and heavy guide scope, as this is easier - especially if your telescope cannot withstand much additional loading.
The off-axis guider is extremely compact and relatively lightweight. It is therefore also well suited for your photography using smaller telescopes / mounts.
An off-axis guider works really simply
The off-axis guider is easily slotted into your 2" focuser and clamped in place. It has a T2 thread on the camera side - standard for the easy adaptation of your camera. To take photos with a DSLR camera, you only need a matching T-ring - and that's everything.
When the light passes through the off-axis guider, a small amount is deflected via a small lateral prism. An additional 1.25" opening now lets you use your reticule eyepiece or an auto guider. You can then get started immediately after you have found a suitable guide star in the field of view.
Long exposures - Pin-sharp astronomy photos
You have probably seen many beautiful astronomy photos - magnificent galaxies with imposing spiral arms, red-glowing hydrogen nebulae, globular clusters whose countless stars look like they are embedded in velvet. All those photos were taken using long exposures - photos you can take using an off-axis guider.
You can now control the tracking precisely and achieve deep sky images with perfect pin-sharp stars.
Comentariul expertilor nostrii:
Autoguiderul vine complet cu adaptorul necesar pentru focuserele 2".
În cazul în care nu se va conecta niciun autoguider, ci un reticul, este necesar şi
dieser Adapter sau dieser Adapter. Pentru a compensa calea optică avem în sortiment inele T2, în funcţie de mărimea necesară: 7,5mm, 15mm sau 40mm.
(Bernd Gährken)
The autoguider comes complete with the adapter required for a 2" focuser. If no autoguider, but rather a reticle, is to be connected, then this Adapter or this Adapter is required.
We have T2-rings in our product range for optical path compensation. Depending on the length required, they are:
7.5mm, 15mm or 40mm.
(Bernd Gährken)
